Tube sockets may wobble a little but make good connection (my vintage tube test equipment is similar). Description from Pacific Creek web site. Pacific Creek E34I is a 45 Watts per channel stereo integrated EL-34 push-pull amplifier, operating in "Ultra-Linear" mode, which offers triode like lower distortion and pentode like higher power efficiency. 2.5 dB to ensure a warm and detailed reproduction of sound. Without the typically large NFB in a push-pull amplifier to cover up distortion, E34I depends on the clean outputs of quality output transformers to achieve the specification below at high power.
With a good set of power and output transformers E34I offers unprecedented upgraded potential with a large selection of quality NOS (New Old Stock) and current production tubes. The driver stage and pre-driver stage of E34I are designed to accept a wide range of tubes from various manufacturers while maintaining optimal bias. This allows the user to fine tune the sonic experience according to his personal taste.Integrated amplifier with CD/TUNER/AUX1/AUX2 inputs. Independently adjustable bias (one per tube, four total). Point-to-point wiring (except for the bias control). 5-way binding posts for 4 and 8 Ohms speakers. Less than 1% at 30 Watts.
Less than 2% at 35 Watts. Less than 5% at 45 Watts. 15Hz - 35 kHz (-3 dB).20Hz - 22 kHz (-1 dB). Background Noise Level: Less than 3.5 mV r. Shuguang 6SN7 (6N8) x 4. Dimension: 17" (W) x 15" (D) x 8 (H).
Specifications are typical and subject to change without notice Bias meter (multi-meter) capable of reading 0.5VDC nominal is not supplied Distortion is higher at upper and lower frequencies. The item "New Pacific Creek E34I Stereo Integrated EL34 Tube Amplifier" is in sale since Tuesday, February 26, 2019. This item is in the category "Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps". The seller is "tubeexpress" and is located in Federal Way, Washington.
This item can be shipped to United States.