Cayin A-100TMK2 KT88 Vacuum Tube Integrated AMP TR/UL Mode Max 80Wx2

  
Cayin A-100TMK2 Vacuum Tube Integrated Amplifier. This integrated valve amplifier looks as good as it sounds. The owner may adjust the bias of the power valves by using gain controls and a high precision VU meter on the outside of the amplifier. To control the input voltage of the power stage, it uses 6SN7 valves, which improve the stability of the four KT88 for each channel.

This makes the frequency range of the power stage more linear. That may sound very complex to anyone not involved in the secrets of valve design, but you don't need to be a technical expert to feel the beauty of sound reproduction, which is possible by connecting it to your speakers.

Specially new designed output transformers for this edition. Gold plated phosphorated copper pins porcelain tube sockets. High end purple copper speaker out terminals. Teflon Silver plated high purity internal wiring. High precision VU meter on the top plate.

Bias adjustment easily done outside. 6SN7 x 1 + 12AU7 x 4 for preamplifier session. The power amplification uses KT88x8 for class AB1 Push-pull power amplifier. Japan Takman carbonic film high end for audio resistors. New protection circuitry for ac and audio transformers.

Automobile grade paint finish on top chassis. Can be used as integrated amplifier or power amplifier. High end Nichicon capacitors and audio choke coil. High quality Japan ALPS motorized volume control. Ultralinear / Triode mode selection (selectable via remote control unit).

All point to point wiring (hand soldering). 3 pairs RCA input + 1 pair RCA pre-amplifier input. Removable metallic tube protection cage included. Output Power: 45W+45W (RMS Triode mode). Input Sensitivity: 350mV (be Integrated AMP). Power Consumption: 480W (MAX), 280W (MIN). Tube: 12AU7 x 4, 6SN7 x 1, KT88 x 8.