LUXMAN CL-1000 Vacuum Tube Integrated Amplifier Control Amplifier

  

LUXMAN CL-1000 Vacuum Tube Integrated Amplifier Control Amplifier. Two-stage amplification NF type using the highly reliable E88CC tube made by JJ (Slovakia), which has a high signal-to-noise ratio and a thick, clear midrange.

Luxman's original oil capacitor is used for the coupling capacitor, achieving a thick sound quality. Equipped with the newly developed electronically controlled transformer attenuator LECUTA (Luxman Electric Controlled Ultimate Transformer Attenuator). 34 relays paired with a 34-tap transformer are switched with a volume knob for detecting position information on the front that does not pass through music signals.

A volume control mechanism using a transformer that does not cause sound loss even at low volumes. The core of the transformer for the LECUTA attenuator uses Finemet®, which has a high saturation magnetic flux density and relative permeability due to its unique nano-crystal structure and low core loss.

Equipped with a high-precision articulator (degaussing function) that uses an oscillation frequency that operates when the power is turned on (manual operation is also possible) to prevent performance degradation due to magnetization. A transformer with a super permalloy core that boasts high magnetic permeability for independent L/R is used for the output. A transformer with a super permalloy core that boasts high magnetic permeability for independent L/R is also used for the balanced input. No resistors are inserted in series into the signal system, resulting in a pure, energetic, and smooth sound quality. (When line straight is ON).

Equipped with E88CC BASS/TREBLE independent 3-stage frequency switching LUX tone control, allowing for fine sound quality adjustment. The amplifier circuit power supply is a powerful constant voltage circuit configuration that separates L/R from the block capacitor, providing excellent separation and ample supply. Inspired by the famous C-1000 model released in 1975, this elegant design features a three-dimensional front panel made of a combination of three thick aluminum sheets and high-quality, precise knobs and levers. The U-shaped wood case has a piano finish with a walnut veneer and a colorful rosewood color scheme. Finished in the same style as the MQ-300 wooden frame.

A sturdy box structure divided into sections blocks out vibrations and noise, and the amplifier board is floated by vibration-damping rubber. Five inputs (four unbalanced and one balanced), four outputs (two unbalanced and two balanced). Equipped with gradient cast iron legs to protect delicate music signals from unnecessary vibrations. Equipped with RCA input terminals made of a new material, copper alloy, which combines the conductivity of copper with the hardness of brass. Equipped with a high-quality AC inlet that is non-magnetic nickel-treated and gold-plated to firmly support the power cable. The power cable included is the JPA-15000 (with polarity mark), which uses a non-twisted 3.5mm² high-purity OFC wire and a gold-plated plug. Input impedance LINE: 180mV / 50k?? Output / Output impedance LINE / BAL.

LINE: Rated 1V / 1k? Frequency response LINE / BAL.

LINE: 6Hz to 140kHz (±3.0dB). Total harmonic distortion LINE / BAL. S/N ratio (IHF-A) LINE / BAL. Tone control ±8dB, turnover frequency switchable. BASS: 150 / 300 / 600Hz.

TREBLE: 1.5k / 3k / 6kHz. Low cut 30Hz -6dB / oct. Circuit type: 2-stage amplification P-K NF type, tone control P-G NF type. Vacuum tubes used: E88CC (JJ-made, highly reliable tube) x 6.

Power supply voltage: AC100V (50/60Hz). Power consumption: 38W (based on Electrical Appliance and Material Safety Law).

External dimensions: 460 (width) x 166 (height) x 454 (depth) mm. Depth includes 13.5mm front knob and 14.5mm rear terminal. Weight: 24.4kg (main unit), 32.2kg (standard packaging). Accessories: Power cable (JPA-15000: with polarity mark).

International Buyers - Please Note.