We are a dealer for McIntosh, B&W, Sonus Faber and more. You will receive a receipt from our store and service after the sale. Our audio experts are here to answer your questions, help you with hook up and provide you with the same experience you would receive if you had walked into our showroom. The Retro Stereo 50 Vacuum Tube Amplifier from iFi AUDIO utilizes four EL84X and two ECF82 tubes with an advanced ground-up circuit and is equipped with a Burr-Brown DAC chip to output up to 25W per channel. It features connectivity for both analog and digital audio devices, with stereo RCA, optical/coaxial combo, and USB inputs.Smart devices with Bluetooth are also supported, with aptX for high-fidelity wireless streaming from supported devices. NFC makes the pairing process easy. The Stereo 50 also has separate 3.5mm and 6.3mm headphone outputs, each with dedicated gain and sensitivity, to work with a wide range of both over-ear and in-ear headphones. EL84X and ECF82 Vacuum Tubes. 25W per Channel Power Output. Supports PCM, DSD, and DXD Formats. Stereo RCA, Optical/Coaxial, USB Inputs. Separate 1/4" and 1/8" Headphone Outputs. Phono Pre-Amp for MM/MC Turntables. Analog Tone and Volume Controls.
Digital and Analog Technologies Combined. The Stereo 50 features four EL84X and two ECF82 analog tubes with an advanced ground-up circuit. Running primarily in Class A, its 25W per channel output provides both power and realism to your music sources. The tubes can be removed and replaced if you wish to customize the sound.Bluetooth aptXBluetooth aptX offers CD-like-quality wireless audio beyond normal Bluetooth. USB & SPDIF for Computer Audio. High-resolution audio is supported via USB, coaxial, and optical inputs. It supports PCM from 16-bit/44 kHz up to 32-bit/768 kHz, DSD up to Octa-DSD512 22.6/24.6 MHz, and DXD 2x to 768 kHz. The minimum phase filter for PCM and bit-perfect filter for DXD/DSD ensure maximum enjoyment with a smooth and organic tonality. Burr-Brown DAC with AMR Technology. The Burr-Brown DAC chip uses trickle-down technology from AMR to give your digital music a classic, analog sound. 1/4" and 1/8" Headphone Outputs. The Stereo 50 uses separate 1/4" and 1/8" headphone outputs, each with its own dedicated gain and sensitivity to match high-sensitivity in-ear monitors and low-sensitivity over-ear headphones respectively. The 1/4 output pumps out 7000mW to power high-impedance headphones. The 3D Holographic for Headphones technology uses pure analog signal processing to deliver a wide-open and spatially correct sound stage for headphones to enhance the listening experience. XBass dynamically corrects the bass response. The MM/MC phono input has an adjustable ultra-wide gain from 38-62 dB and its tone control invokes classic equalization technology. With 6 different EQ curves (via the precision tone control), every stereophonic record is catered for, from the default RIAA to EMI and Decca. The noise floor of the Stereo 50 is below (as opposed to above) that of the record.
Digital volume controls truncate the delicate audio signal, so the Stereo 50 uses analog tone and volume control. A motorized Alps potentiometer controls the volume with a less than 3 dB tracking error. A remote control is included for use from your couch. The item "IFi Audio Retro Stereo 50 Stereo Tube Integrated Amplifier Authorized Dealer" is in sale since Friday, December 14, 2018.
This item is in the category "Consumer Electronics\TV, Video & Home Audio\Home Audio\Receivers & Amplifiers\Amplifiers & Preamps". The seller is "aexch1" and is located in Richmond, Virginia. This item can be shipped to United States.