Tube Integrated Amplifier

Radius Vacuum tube integrated amplifier High resolution compatible radius RA-V

Radius Vacuum tube integrated amplifier High resolution compatible radius RA-V
Radius Vacuum tube integrated amplifier High resolution compatible radius RA-V
Radius Vacuum tube integrated amplifier High resolution compatible radius RA-V
Radius Vacuum tube integrated amplifier High resolution compatible radius RA-V

Radius Vacuum tube integrated amplifier High resolution compatible radius RA-V    Radius Vacuum tube integrated amplifier High resolution compatible radius RA-V

Vacuum tube integrated amplifier [High resolution compatible]. High resolution vacuum tube amplifier.

Four 6L6G are used for the output tube and two 2C51 are used for the input tube and the driver tube. The output stage uses 6L6G with 2 channels for each class and push-pull drive with class AB operation to achieve high output of 15W+15W. In addition, the distortion rate is reduced by adopting an SRPP circuit with twin triodes in the first stage to reproduce high-pitched tones with a wide dynamic range and gentle warm tone. A large toroidal transformer is used for the power block that supports the gentle and warm sound. The toroidal type is low-noise and powerful, and always enables stable power supply over the entire playback frequency range. For the many parts that make up the circuit, we use only carefully selected high quality products to raise the quality of the product. The uncompromising parts composition brings sound to life. Equipped with a total of 8 vacuum tubes. Amplifier control is only 3 points, power switch, volume and selector.

This is the result of carefully selecting only the parts necessary to reproduce the original timbre of the sound source at a high level without adding extra parts. There is a sound that sounds because of the simple circuit configuration.

The selector is also equipped with a switch to an iPod, so you can easily connect to an iPhone or iPod. Output stage circuit type: Class AB, push-pull drive. Vacuum tube used: 6L6G x 4, 2C51 x 4. Rated output: 15W+15W (8 O), 15W+15W (4 O). Total harmonic distortion rate: 0.1% or less (1kHz).

Frequency characteristics: 20Hz-40,000Hz (-1dB). Input terminal: RCA terminal (stereo x 4 systems). Power supply voltage: AC 100V. Dimensions: (W)330mm x (H)186mm x (D)385mm. We are located in Japan.

It's our pleasure to make you happy by proposing our recommend item. If you have any questions or request about items, please feel free to ask us. International Buyers - Please Note. ·We do not mark merchandise values below value or mark items as "gifts" - US and International government regulations prohibit such behavior. This item is in the category "Consumer Electronics\TV, Video & Home Audio\Home Audio\Receivers & Amplifiers\Amplifiers & Preamps".

The seller is "358rc_av_japn" and is located in this country: JP. This item can be shipped worldwide.

  • Model: RA-VT11
  • Type: Tube Amplifier
  • Color: Silver
  • Brand: Radius


Radius Vacuum tube integrated amplifier High resolution compatible radius RA-V    Radius Vacuum tube integrated amplifier High resolution compatible radius RA-V