The integrated amplifier uses the first independent L and R channel choke transformers. Adopt L / R channel independent power circuit for screen grid. Combined with a thorough shield structure, improved crosstalk between channels over a wide band.P-G feedback type preamplifier with 1 stage amplification is provided. This simple amplifier has excellent characteristics and sound quality, and is an excellent circuit that has been used in the U · BROS series preamplifiers at Uesugi Laboratories. The low noise vacuum tube "ECC83" manufactured in the era of vacuum tube prosperity is used as a preamplifier and "ECC82" is used as a driver to ensure high reliability. The four output tubes are independently self-biased and designed to suppress screen grid voltage. Therefore, a wide range of "6L6" family vacuum tubes can be used without adjustment. In the old model "UTY-15", it was a push-pull output stage with a triode connection of "6L6GC" vacuum tube made by GE. The screen grid voltage is set to a lower value to the beam tube connection, which is the original usage of this vacuum tube.
Equipped with a tape monitor switch circuit, the recorder can of course be connected to an external sound quality adjustment device tone amplifier, graphic, etc. Speaker output terminal supports 4,8,16O and can match impedance of wide speaker. Through succession of track record, reliable design and production methods. A non-resonant, non-vibrating, non-interfering structure that is not disturbed by others is inherited by a high-rigidity chassis made of 1.6mm thick galvanized steel sheet.
We do not perform wiring by printed circuit board in signal amplification circuit, but take over hand wiring which can be said to be art by skilled craftsman with career for more than 40 years. · Output tube: 6L6GC (manufactured by GE). · Driver tube: ECC82 (Siemens). · Voltage amplifier: ECC83 (manufactured by Telefunken).· Rectifier tube: 5U4GB (manufactured by EH). Output terminal: Source output: 1 system, Speaker: 1 system (4,8,16O). Rated output: 14W + 14W (THD5%). Input / output terminal shape: Unbalanced input / RCA terminal, speaker terminal / banana terminal. Residual noise (A-NET): 0.2 mV (master volume minimum), 0.45 mV (master volume maximum).
Frequency characteristics: 10 to 40 kHz (+0, -3 dB). Power consumption: 130W (AC100V 50 / 60Hz). Maximum external dimensions (mm): 320 (width) x 199 (height) x 345 (depth). We are located in Japan. It's our pleasure to make you happy by proposing our recommend item.
If you have any questions or request about items, please feel free to ask us. International Buyers - Please Note. ·We do not mark merchandise values below value or mark items as "gifts" - US and International government regulations prohibit such behavior. This item is in the category "Consumer Electronics\TV, Video & Home Audio\Home Audio\Receivers & Amplifiers\Amplifiers & Preamps". The seller is "358rc_av_japn" and is located in this country: JP.This item can be shipped worldwide.